paਪੰਜਾਬੀ
1060 Aluminum Sheet

1060 Aluminum Sheet

ਵੇਰਵਾ
1060 aluminum sheet is a high-purity industrial aluminum coil with an aluminum content of more than 99.6%.
ਸ਼੍ਰੇਣੀ
Share to
ਜਾਂਚ ਭੇਜੋ
ਵਰਣਨ
ਤਕਨੀਕੀ ਪੈਰਾਮੀਟਰ

 

1060 aluminum sheet is a high-purity industrial aluminum coil with an aluminum content of more than 99.6%. It is widely used in the manufacture of parts and decorative materials that do not require high strength due to its good formability, weldability and corrosion resistance. It is suitable for billboards, household appliances, packaging and construction industries. Due to its light weight and easy processing, it has become the preferred material for many light industrial products.

 

 

1060 alumimum sheet

O,H12,H14,H16,H18,H19,H22,H26,H28,H32,H36,H34,H38

0.2-8.0

100-2650

C

Coating, embossing, brushing, polishing, anodizing, etc.

 

 

0.2% (MPa)

Elongation Rate D10

(%)

110-136

>=75

3-5

 

The following is a comprehensive introduction to 1060 aluminum sheet

 

I. Basic Properties

1060 aluminum sheet is an industrially pure aluminum with an aluminum content of up to 99.6%, belonging to the 1000 series. Its density is 2.68-2.71 g/cm³, its tensile strength is 110-136 MPa, and its elongation is 3%-5%.

High Purity: Its impurity content is extremely low (silicon <= 0.25%, copper <= 0.05%), approaching the properties of pure aluminum.

Lightweight: Its weight is only one-third that of steel, making it suitable for lightweight designs.

Surface Properties: A naturally formed aluminum oxide film resists atmospheric, aqueous, and common acid and alkali corrosion.

 

II. Core Advantages

Its excellent plasticity makes it suitable for complex forming processes such as stamping, drawing, and bending, and is particularly easy to process in the annealed state (O state).

Surface treatments such as anodizing and painting enhance corrosion resistance and decorative effects.

Excellent electrical and thermal conductivity, reaching 55%-61% (international annealed copper standard), second only to silver and copper.

It cannot be heat-treated to strengthen, but its low cost makes it suitable for general industrial applications.

 

III. Applications

Architectural Decoration: Curtain wall panels, suspended ceilings, and outdoor billboards, balancing lightweight and weather resistance.

Electronic and Electronics: Heat sinks, busbars, and battery flexible connectors, utilizing its high conductivity.

Industrial Manufacturing: Chemical containers, molds, and deep-drawn tanks, relying on its corrosion resistance and formability.

Transportation: Battery heat dissipation components for new energy vehicles, reducing vehicle weight.

 

IV. Comparison with Other Aluminum Materials

1060 vs. 6061: 1060 is pure aluminum, with lower strength but better formability; 6061 is an aluminum-magnesium-silicon alloy that can be strengthened through heat treatment, making it suitable for structural parts. 1060 vs. 7075: 7075 has a high zinc content and is extremely strong (used in aerospace), but it's significantly more expensive than 1060.

1060 aluminum sheet, due to its high purity, ease of processing, and cost-effectiveness, has become a key choice as a basic industrial material.

 

As industrially pure aluminum (aluminum content >=99.6%), 1060 aluminum sheet has both advantages and limitations in welding performance. A detailed analysis is provided below

 

I. Welding Performance Advantages

It supports gas welding, hydrogen atomic welding, and contact welding, making it particularly suitable for welding thin sheets (e.g., 1-10mm thick).

Argon arc welding (TIG/MIG) effectively reduces the effects of oxidation, resulting in high-quality welds.

It maintains good ductility after welding, but its strength is relatively low (tensile strength is approximately 66%-78% of the parent material).

The aluminum oxide film can be removed through mechanical cleaning or chemical treatment, improving welding success rates.

 

II. Welding Challenges and Precautions

Dense oxide films (Al₂O₃) easily form on pure aluminum surfaces, requiring DC reverse polarity or high-frequency pulsed argon arc welding to remove them.

Welding wire containing silicon and magnesium (such as 4043) is recommended to improve weld pool fluidity.

Excessive heat input can easily lead to coarsening of grains or deformation. Pulsed argon arc welding or micro friction stir welding (μFSW) is recommended for temperature control.

 

III. Typical Welding Process Recommendations

<5mm): Pulsed tungsten inert gas arc welding is preferred, as it offers a wide parameter window and minimizes deformation.

For thick plates (5-50mm): Metal inert gas arc welding (MIG) or friction stir welding offers high efficiency and eliminates the risk of porosity.

Overall, 1060 aluminum plate welding requires a balance between process selection and defect control, making it suitable for structural parts with low strength requirements.

 

ਗਰਮ ਟੈਗਸ: 1060 aluminum sheet, China 1060 aluminum sheet manufacturers, factory

ਜਾਂਚ ਭੇਜੋ
ਸਾਡੇ ਨਾਲ ਸੰਪਰਕ ਕਰੋਜੇ ਕੋਈ ਪ੍ਰਸ਼ਨ ਹੈ

ਤੁਸੀਂ ਜਾਂ ਤਾਂ ਸਾਡੇ ਨਾਲ ਫੋਨ, ਈਮੇਲ ਜਾਂ online ਨਲਾਈਨ ਫਾਰਮ ਰਾਹੀਂ ਸਾਡੇ ਨਾਲ ਸੰਪਰਕ ਕਰ ਸਕਦੇ ਹੋ. ਸਾਡਾ ਮਾਹਰ ਜਲਦੀ ਹੀ ਤੁਹਾਡੇ ਨਾਲ ਸੰਪਰਕ ਕਰੇਗਾ.

ਹੁਣ ਸੰਪਰਕ!